Varkraft 3 126a Pryamoj Ssilkoj
Feb 10, 2015 This feature is not available right now. Please try again later.
Zvezda 1/35 SdKfz 251/3 Ausf.B Mittlerer Funkpanzerwagen Kit Number: 3604 Reviewed by Grant DeRue, IPMS# 42477 MSRP: $32.95 Distributed by Dragon Model USA Website: Have you ever built a model kit that challenged you a whole lot? In the end, you were happy with the result, and you learned a lot of new skills. When a kit challenges you, you also learn what not to do.
This happened to me a whole lot in this build. This kit is a B model or the second iteration of the 251 halftrack. These models were manufactured earlier in the war. The /3 stands for the vehicle being a communications vehicle. What is in the box? Upon opening the box, you see a lot of parts. You also see the two-parts-per-link individual track links.
It appears that Zvezda has engineered this kit to be built up into many other of the Ausf. Approximately 567 styrene parts are included in the kit. Not all of them were used to build this model. I left some parts off, and some of the parts included in the kit are meant for other versions of the 251 Ausf. The directions are black and white and 4 pages with print on the front and back including a parts diagram, assembly instructions, and painting and decal diagrams. I found the directions easy to read.
Decals are included for three vehicles (two gray halftracks and one dark yellow halftrack). In the directions, two decals are called out for dash board details that are not included on the decal sheet. The dash board is difficult to see when the vehicle is finished. Part Issues: For the number of parts included in this kit, inevitably there will be problems. I'm listing them first, only to get them out of the way in the review. When I opened the box, I found 3 broken parts.
The star antenna (part F7) and the external jerry can holders (part B5 x2) were broken and not used for the build. The star antenna being deployed was an option for this build.
I left the antenna stowed. The jerry can holder could have been pieced together, but I liked the look of the early style rear doors that they were being mounted to. I left these off. The prominent engine vent doors (parts D9 and D10) both have large sink holes that were very difficult to fill/remove. The upper ½ of the crew compartment (part E16) was bent inward on the front face. I used heat to bend this part back.
The rubberized track pads (part A3 x120) all have sink holes. I did my best to fill all of these in. This part happens to be very visible on the kit. The rear number plate decals included in the kit didn't match the shape of the number plate parts (parts F9 and F10). To keep the model out-of-box, I cut and shaped pieces of sprue to fit the decals. These parts were then glued to the kit parts. The Build: Starting the build, I decided to leave the engine vent doors and radiator vent door open.
This would require the engine and radiator to be built, painted, and weathered. I pretty much followed the flow of the printed directions when building the kit. This means that I started with the kit engine. It took me 8 hours to build, paint, and weather the engine and radiator. After finishing the engine, the chassis and running gear minus the tracks were then painted and put together.
I then began the tracks. It took me 11 hours to remove the tracks from the sprues, clean them, fill them, paint them, and then place them on the kit.
When reviewing the kit directions, I made the decision to build this individual tracks as 'workable.' This is where I went wrong. It would take really precise glue to make this happen. My advice is to build these tracks unpainted without the rubberized track pads, use liquid cement to temporarily place the track links onto the kit, paint the metal track parts, permanently place the links onto the kit, and then place the painted rubberized track pads onto the kit.
I'm betting that using this method will cut track build time in half. I then placed the body onto the chassis and finished the kit per the directions. This is where I went wrong.
Buy products related to nissan tiida products and see what customers say about nissan tiida products on Amazon.com FREE DELIVERY possible on eligible purchases. Rear Windshield Back Wiper Arm With Blade for Nissan Rogue 2008-2013 Nissan Qashqai 2008-2013 Nissan Juke 2011-2016 Nissan Tiida 2011-2016,OE: 28780-JM00A, Rear Wiper Blade:12'. Oct 11, 2014 Ekipa ima nekakve bizarne i komplicirane metode za ciscenje nara, pa sam odlucio pokazati kak se nar cisti na smislen nacin. This feature is not available. 1bKGthTXDJn9Q - sites.google.com. Kak otkritj kapot na nissan 2016. View credits, reviews, tracks and shop for the 1969 Vinyl release of Kak on Discogs.
I placed the left side lower hull (part E14) slightly forward of where it was supposed to be, and this messed up the geometry of the entire kit. I used a lot of filler between the upper hull and the lower hull and the upper the fenders and the kit hull. If you dry fit things carefully, it is my belief that filler won't be needed. Since there were some fit issues due to my misalignments, I created a see-through effect from the crew area into the engine bay.